Mascotte, FL water quality
Mascotte is served by a patchwork of municipal connections and private wells, both drawing on the Floridan Aquifer. Hardness runs high throughout, with well-fed pockets showing more iron and sulfur than city-served streets.
Scored from published utility reports — legally compliant water can still score high.
Free in-home water test
Your Mascotte score is 62/100 — see what it is at your address.
Book my free water testNo obligation, no hard sell. Mon–Sat 8:00am–7:00pm.
Contaminant panel
What's actually in Mascotte water.
City / well mix CCR · reviewed July 29, 2026
Hardness
Soft < 3 gpg
High across both city-served and well-served homes.
Source: City / well mix — CCR link not yet confirmed. Look it up on EPA SDWIS
Chlorine
EPA MRDL 4 ppm
Municipal disinfection residual in served areas.
Source: City / well mix — CCR link not yet confirmed. Look it up on EPA SDWIS
Iron
EPA SMCL 0.3 ppm
More prevalent in well-fed pockets.
Source: City / well mix — CCR link not yet confirmed. Look it up on EPA SDWIS
Sulfur / Hydrogen Sulfide
EPA SMCL <0.05 ppm
Occasional odor complaints from private wells at the edges.
Source: City / well mix — CCR link not yet confirmed. Look it up on EPA SDWIS
Trihalomethanes
EPA MCL 80 ppb
Disinfection byproduct in city-served zones.
Source: City / well mix — CCR link not yet confirmed. Look it up on EPA SDWIS
Your street, not just your city
Which Mascotte neighborhood are you in?
Enter your full address and we'll name your subdivision and the exact water system that serves it. Contaminant testing is only published at the utility level, so the numbers are the same — the geography is yours.
Check your water in 5 seconds
Enter your address or zip — we'll pull your neighborhood's contamination profile.
Neighborhoods
Ranked worst → best.
2 recognized Mascotte communities and subdivisions, ranked worst to best. Tap one for its profile.
Neighborhood profile
Hammock Ridge
Mascotte, FL · City / well mix
- Hardness
- High
- Chlorine
- High
Hammock Ridge (built 2000s, ~400 homes) sits on a service zone with higher chlorine/chloramine residuals; expect noticeable taste and heavier scale buildup on fixtures and water heaters.
- Built 2000s~400 homes34753
How we score a Mascotte neighborhood
No agency publishes testing per subdivision — it is published per public water system. So the score is a documented model, not a measurement:
- 1Start from the serving utility's own published baseline (hardness plus disinfection-byproduct load from its most recent Consumer Confidence Report).
- 2Add for plumbing era: +8 for pre-1960 housing stock, +4 for 1960s-80s, +2 for 1990s-2000s, +0 for 2010 and newer.
- 3Add for service-zone position: +6 where the subdivision sits at the end of long distribution mains (newer master-planned build-outs), +3 for the oldest downtown mains.
- 4Add for local sources: +12 private or community well, +9 airport/GOAA PFAS influence area, +7 industrial adjacency, +3 golf-corridor irrigation, +2 lakefront shallow-well and iron staining.
- 5Clamp to 30-95, then map to low / moderate / high. Wells get chlorine scored near zero — nothing is disinfecting that water at all.
Where the Mascotte community names come from
Mascotte publishes no official neighborhood map, so these are the recognized subdivision and community names used by the city, USPS mail routes, and local listings.
Data compiled from Mascotte Consumer Confidence Reports and EPA ECHO monitoring. Neighborhood-level readings are estimates based on service zone, plumbing age, and source blending; a free on-site test provides exact numbers for your address.
Water system
City / well mix
We have not yet confirmed which public water system serves this address against EPA SDWIS and the operator's own service-area map.
Part of this area is on private well rather than the utility. Confirm at the meter.
Maintenance
Last reviewed July 29, 2026
CCRs publish annually. We re-check every page against the current report. Full methodology.
What happens next
The free test, exactly as it works.
We're testing homes in Mascotte now
Book a slot and a technician brings a full field kit to your kitchen sink — hardness, chlorine, iron, TDS and pH, measured on site.
About 20 minutes, start to finish
You get your numbers written down and compared against your utility's own published report. Nothing is installed on the test visit.
A recommendation, not a hard close
If filtration makes sense, you get a fixed written price and financing options. If it doesn't, we'll tell you that too.
We don't publish customer reviews or install counts here until they come straight from our Google Business Profile — nothing on this page is a stand-in for real ones.
2 quick questions
What should we look at first in your Mascotte home?
No contact info needed to answer — this just tells our tech what to test for.
Straight answers
Before you call anyone in Mascotte.
Need is the wrong word: your Mascotte utility delivers water that meets every enforceable EPA limit. Filtration is about the things those limits don't cover — hardness that scales your fixtures and water heater, chlorine taste and smell, and disinfection byproducts that sit above the stricter (non-enforceable) EWG health guideline. Legal water and water you enjoy drinking aren't the same standard.
Free in-home water test
See what's actually coming out of your tap in Mascotte.
A technician tests hardness, chlorine, iron, TDS and pH at your kitchen sink, walks you through the numbers, and leaves you the results — whether or not you buy anything.
Book my free water testNo obligation, no hard sell. Mon–Sat 8:00am–7:00pm.
Not ready to book? Text me this report.
One field. We'll send a link to this Mascotte water report so you can read it later or forward it to a neighbor.
Phone number only. No email, no spam.
Get your Mascotte numbers in writing.
Free in-home water test. Pick your own day and time window — name and phone, nothing else.
Book my free water testNothing gets installed on a test visit. If filtration makes sense, you get a fixed written price.